TM-12E/13E/13R
EN-3
1. FEATURES
Thank you for purchasing this instrument. Please read
this instruction manual carefully and completely before
using your digital clamp meter correct operation will
insure the best performance and decrease the
possibility of damages.
*Jaws opening up to 30mm.
* The maximum conductor size is 30mm.
* Safety sockets designed.
* Data Hold.
* Impedance in circuit is below 40. The buzzer will
sound.
2. SPECIFICATIONS
a).Display: 3 3/4 digits LCD with maximum reading
3999, Plus decimal point, unit symbol indication.
b).Polarity Indication: Automatic polarity, “-“ display for
negative input.
c).Overload Indication: LCD will show a “OL” in the left
highest position.
d).Low Battery Indication : Replace battery as LCD
display “BAT”.
e).Battery Life: 50 hours approx.(alkaline battery
recommended)
f).Sampling Rate: 2 times per second for digital display.
20 times per second for analog display.
g).Power Supply: R03(AB)/SIZE AAA 1.5V/UM4 battery
x2.
h).Operation Altitude: up to 2000m.
i).Operating Environment: Indoor use. This instrument
has been designed for use in an environment of
pollution degree 2.
To Next Page
Loading...
Need help?
General
