When in doubt, look it up
95
Symbols and messages in the display
Symbols in the display
(flashing above a line key) A caller is waiting. Press the corresponding line
key to switch to this subscriber.
Automatic handsfree: Handsfree mode is activated automatically when you
receive a call.
Do not disturb is activated.
Internal or external call.
The loudspeaker and microphone on the telephone are activated
(Handsfree).
The loudspeaker on the telephone is activated (Call monitoring).
No entries in the call list.
You are part of a conference.
You have lifted the handset.
You have received a message.
Messages in the display
For answering a call. Also for automatic call back.
For changing ringing tones.
For activating a function.
External calls are now diverted to the night units.
For making an announcement to all subscribers within your system simulta-
neously.
LIST
CONF
Accept call
Acoustics
Activate
Activate night service 1
Announce to all
To Next Page
