TX-1 Series Instrument www.tensitron.com pg. 4
2. SPECIFICATIONS
o Full Scale Accuracy
For all models up through 5000 grams: 1%
Accuracy for custom calibrations is material specific
o Power Requirements
For Instrument Input: 9 VDC…2.2A
For AC Adapter: 100-240V~50-60Hz 0.48A
Power Supply operates with input voltages from 100 –240V and includes
several interchangeable adapters allowing use with European, U.S.,
Australian, British, and other plug configurations.
Battery: Rechargeable NiMH, custom proprietary design
o Battery Life
Approximately 12 hours depending on backlighting intensity
o Operating Temperature
32º F to 120 º F
If these values are exceeded, battery charge/discharge rates will decline.
However, this could be offset by using the power supply. Charging in direct
sunlight or near a heat source will not produce a full charge and may
permanently damage battery pack.
o Storage Temperature
20º F to 158º F (instrument and charger)
o Ambient Humidity
10% to 90% non-condensing
o Dimensions
All models without cylindrical rollers: 2.31” x 3.17” x 7.10”
All models with cylindrical rollers: 2.31” x 3.70” x 7.10” (See Figure 1.)
o Weight
.75 lb. (depending on instrument configuration)
o Environment:
Indoor or outdoor use, dust-free environment
To Next Page
Loading...
