CAMERA SETUP continued
Snapshot:
Click the icon to take a snapshot image.
Note
:
Recorded video file names will be saved in the format: CameraName_ Current time.
For example: IPCAM_20081211134442. This recording is from the camera called IPCAM and the
recording ‘end’ time was 13:44:42 on December 11, 2008.
For operator
When you login as an Operator or Administrator, you can enter the ‘For Operator’ page.
Mirror
Click the icons to see the horizontal or vertical mirror image.
Resolution
Select either VGA (640x480) or QVGA (320x240).
Work mode
Select either 50Hz, 60Hz or Outdoor.
Brightness and Contrast parameters
Click the + or - icons to adjust the brightness and contrast of the camera image.
Default All
Click to return the settings to the factory defaults.
For Administrator
When you login as an Administrator, the ‘For Administrator’ functions are enabled.
Device Info - You can find information about the camera such as the Device ID, Firmware Version
and Embeded Web UI Version.
Alias Settings - You can change the name of the IP camera.
Data & Time Settings - Set the time and date.
To Next Page
Loading...
