15mm Wrench
R
L
Note: Do not install the pedals
forcibly if you feel great
resistance.
01
Distinguish between the left and
right pedals. The right and left
pedals are marked by an L and an
R respectively. The right pedal is
used for the side with the
crankset, while the left one is
used for the other side.
02
Tighten the right pedal clockwise
and the left pedal counterclockwise.
03
Stop tightening the pedals if you
feel a lot of resistance.
If this happens, realign and
re-install the pedals.
Tools needed: 15mm Wrench
08.
INSTALL THE PEDALS
019 Assemble your TENWAYS e-bike
To Next Page
Loading...
