▪ The new brake blocks and discs feature relatively smooth
surfaces, so the braking effect will improve after you ride
100 km or brake on long downhills 3 to 5 times, when such
surfaces become roughened.
▪ Check screws between the brake lever and the handlebar,
as well as screws between the brake clamps and frame or
front fork:
1. Check if these screws maintain the same fastening
performance when your e-bike reaches a 200 km riding
distance.
2. Check the fastening performance at every 1,000 km after
the initial 200 km.
3. It is recommended to check the fastening performance of
screws after every 600 km if you often ride under complex
road conditions.
▪ The wear degree of brake blocks should be checked after
you’ve ridden on normal roads for 1,000 km, or 600 km if
the road conditions are complex. The blocks should be
1. Turn on the Bluetooth feature on your phone.
2. Open the TENWAYS app..
3. Tap “Register”, and then scan the QR code on the frame. The
QR code can be found near the bottom bracket at the bottom
of the frame down tube.
4. Fill in the colour and saddle height of your e-bike, and give your
e-bike a name.
5. Turn on the display of your e-bike, and enter the password.
6. Select the name of the Bluetooth beginning with AGO T and
click for connection. From now on, your TENWAYS account will
be bound to the connected e-bike. The next time you use the
app, it will automatically connect to the e-bike within 10 seconds.
▪ Charge the battery to 100% before your first ride.
▪ When charging your e-bike:
▪ Charge the bike indoors and keep it away from direct
sunlight, rain, or snow.
▪ Use only the TENWAYS charger to charge the bike.
▪ Ensure a proper ambient temperature. The best ambient
temperature for the charger is between 20°C and 25°C. A
02.
BEFORE YOUR FIRST RIDE
replaced promptly when they are two-thirds or more worn.
▪ If you feel that the brakes are obviously loose but the wear
degree of brake blocks is still acceptable and there is no
sign of oil leakage on the brakes, contact a professional
bike store and ask technicians to replenish the lubricant.
▪ Contact a professional bike store and ask technicians to
diagnose and fix the cause of any abnormal noise that
persists during riding after you have cleaned any oil from th
brake blocks and discs.
01.
CONNECT TO THE TENWAYS APP
040 Bike usage
To Next Page
Loading...
