EasyManua.ls Logo

Tenways AGO T - Page 48

Default Icon
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to maintain the battery
Operating and storage temperatures of the battery:
The working temperature of the lithium battery is 0°C to 30°C.
It is recommended that the lithium battery be stored in an
environment where the temperature is 0°C to 25°C with
65±20% RH.
The performance of lithium batteries is affected by the
ambient temperature. Don't worry if the performance of
your battery degrades in cold weather. The battery
performance will resume when the temperature rises.
If possible, the battery should not be charged above 95% or
discharged below 10%, as this may decrease battery life. A
reasonable charging and discharging scheme can mitigate
accelerated battery deterioration or damage.
If you are not using your e-bike for an extended time, keep
the power at 50% to 70%, check the battery condition every
2 months to avoid damage caused by over-dischar ing,
charge and discharge the battery every 3 months.
The new brake blocks and discs feature relatively smooth
surfaces, so the braking effect will improve after you ride
100 km or brake on long downhills 3 to 5 times, when such
surfaces become roughened.
Check screws between the brake lever and the handlebar,
as well as screws between the brake clamps and frame or
front fork:
1. Check if these screws maintain the same fastening
performance when your e-bike reaches a 200 km riding
distance.
2. Check the fastening performance at every 1,000 km after
the initial 200 km.
3. It is recommended to check the fastening performance of
screws after every 600 km if you often ride under complex
road conditions.
The wear degree of brake blocks should be checked after
you’ve ridden on normal roads for 1,000 km, or 600 km if
the road conditions are complex. The blocks should be
replaced promptly when they are two-thirds or more worn.
If you feel that the brakes are obviously loose but the wear
degree of brake blocks is still acceptable and there is no
sign of oil leakage on the brakes, contact a professional
bike store and ask technicians to replenish the lubricant.
Contact a professional bike store and ask technicians to
diagnose and fix the cause of any abnormal noise that
persists during riding after you have cleaned any oil from th
brake blocks and discs.
045 Bike usage
03.
ROUTINE MAINTENANCE

Related product manuals