Need help?Do you have a question about the Teradek BOLT 4K Series and is the answer not in the manual?
Describes Bolt 4K's 4K HDR, zero-latency transmission up to 1500 feet over 5GHz band.
Connecting video output from source to transmitter and transmitter output to monitor.
Options for powering devices using AC adapter or compatible batteries.
Keeping devices close for 60 seconds to scan and select optimal wireless channels.
Details of the 2-pin power connector, including GND and +DC assignments.
Guidelines for testing power cable polarity, shorts, and grounding for safety.
Choosing HDMI/SDI output format, including 'Same as Input' or 'Continuous Output'.
Configuring fixed frequency, bandwidth, and frequency selection.
Procedures for pairing and unpairing transmitters with receivers.
Configuring, pairing, and upgrading Bolt devices using dedicated software.
Steps to download and connect the Bolt App to transmitter and receiver.
General| Category | Wireless Video Transmission System |
|---|---|
| Wireless Frequency | 5GHz |
| Supported Video Formats | 1080p |
| Inputs | HDMI |
| Outputs | HDMI |
| Encryption | AES-256 |
| Latency | Less than 1 frame (sub-1ms) |
| Power | Various power input options (depending on model), including Lemo, Barrel Connector, and V/Gold Mount battery plates |
To Next Page
