Teradek Bolt 6 LT - User Manual

1.
WHAT'S
INCLUDED
2.
PHYSICAL PROPERTIES
3.
POWER AND CONNECT
4.
PAIRING
5.
POWER CABLES
6.
MOUNTING
7.
TX/RX CONFIGURATION MENUS
◦
Wireless Settings
◦
Video Settings
◦
Tools
Ter ad ek Us er Gu id e
/
Bolt 6
/
Quick Start Guides
Bolt 6 LT Quick Start Guide
Updated on
Oct 06, 2022
The Bolt 6 LT Set is a real-time wireless video transmission system that
supports 4K video with Teradek’s patented Zero-Delay technology, now with
less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT
can send and receive color-accurate, True-HDR videos in under 0.001
seconds using the set’s included Bolt 6 LT video Transmitter and Receiver.
Bolt 6 LT is cross-compatible with the entire Bolt 4K Series – including Bolt
4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to
expand your workflow requirements. Link up to 6 receivers to one transmitter,
or unlimited receivers when used in Broadcast Mode (available on MAX
models).
Table of Contents
Teradek User Guide
Bolt 6 LT Quick Start Guide | Bolt 6 | Teradek User Guide
https://guide.teradek.com/a/1604143-bolt-6-lt-quick-start-guide
1 von 14
22.02.23, 21:26

Summary

Whats Included

Physical Properties

Power and Connect

Pairing

Pairing Tips

Advice for troubleshooting and improving pairing success rates for wireless devices.

Pairing via Bolt App

Step-by-step instructions for pairing devices using the mobile Bolt App.

Wired Pairing via Bolt Manager

Process for pairing devices using a computer and Bolt Manager software via USB.

Power Cables

Mounting

TX;RX Configuration Menus

Wireless Configuration

Settings related to wireless frequency, band, broadcast modes, and fixed frequency.

Video Settings

Options for adjusting video output quality, 3D LUTs, and on-screen display (OSD).

Tools

Access to diagnostic tools like Signal Quality Graph and Spectrum Analyzer.

Advanced System Settings

Configuration for keypad lock, HDMI output, audio, Bluetooth, and system resets.

Bolt App

Connecting via Bluetooth

Steps to connect the Bolt device to a mobile device via Bluetooth for app control.

Transmitter Status Display

Information shown on the transmitter's status screen, including signal strength.

Receiver Status Display

Details on the receiver's status screen, network, and signal quality.

Teradek Bolt 6 LT Specifications

General

Wireless Frequency	5 GHz
Encryption	AES-128
Metadata Support	Yes
Range	Up to 750 feet (228 meters)
Latency	<1ms
Video Input	HDMI
Video Output	HDMI
Resolution Support	1080p60
Multicast	Yes
Operating Temperature	0-40° C