MOUNTING
• Mount the transmitter onto your camera using the included hot shoe mount adapter,
keeping the chassis and fan vents clear of any obstructions.
• For best results, orient the transmitter so it has clear line-of-sight to the receiver.
Spark 4K devices have a 1/4”-20 threaded hole and two M3 threaded holes on the bottom for mounting
the included light stand adapter or any other mounting accessory.
Spark 4K
transmitters can
be mounted on a
compatible camera
DO NOT OVERTIGHTEN SCREWS INSERTED INTO
THE 1/4”-20 OR M3 THREADED HOLES.
Doing so can damage the transmitter’s chassis voiding the warranty.
CAUTION:
Spark 4K
receivers mount
on a light stand or
adapter
11 127
To Next Page
Loading...
