2 Safety
2 Safety
2.1 Requirements for service personnel
Any service work on the machine requires
comprehensive knowledge of the mode of
operation and dangers of the machine as a
whole and its components.
Therefore, the service staff must have certain
minimum qualifications depending on the
task.
For the required qualification, a distinction is
made between installation/removal of com-
ponents on the one hand and diagnostics on
the other hand.
Activities Qualifications
Disassembly and installa-
tion of components
Must be 18 years old (16 years is sufficient for assistant work under
supervision of an authorized service technician).
Must have the physical and mental abilities to carry out the responsibili-
ties, tasks and actions.
Must be trained in First Aid and also capable of providing it.
Must have the respective national permission for operating this loading
machine.
Must know the danger potential of repair work on loading machines.
Knowledge and understanding of all safety-related notes, sources of
danger and safety measures.
Must have been trained and instructed in rules of conduct in the event
of a fault.
Must have read and understood the entire documentation, in particular
these Service Instructions, and must be able to apply it.
Must be qualified to work on the mechanical, electrical, control and hy-
draulic system of loading machines by a corresponding nationally rec-
ognized training for service work and must be up-to-date with the latest
state of knowledge.
Diagnostic work Must be able to read and understand circuit diagrams and hydraulic
diagrams.
Must have attended a work-specific training organized by TEREX |
Fuchs or a person authorized by TEREX | Fuchs for carrying out the
required service work.
4 (60) Version 11.08.2008 12.65-SA10403-en-110808
To Next Page
Loading...
Need help?
General
