Need help?Do you have a question about the Terex Genie GS-1432m and is the answer not in the manual?
General| Brand | Terex |
|---|---|
| Model | Genie GS-1432m |
| Category | Lifting Systems |
| Language | English |
Identifies components and functions of the ground control panel.
Identifies buttons and functions on the platform control panel.
Details operation of lift/drive controls, steer, and mode selection buttons.
Lists items to check during a pre-operation inspection.
Steps for performing ground control tests, including emergency stop.
Procedures for testing platform lift and lower functions.
Tests for platform controls, alarms, and function enable switch.
Tests platform raise/lower and outdoor mode activation.
Procedure to test the drive function button.
Procedures for testing steer wheel movement.
Tests machine movement and braking.
Tests how the machine responds to slopes and tilt alarms.
Tests the reduced drive speed when the platform is raised.
Procedures for testing pothole guard deployment and functionality.
Tests pothole guard deployment, functionality, and related drive behavior.
Instructions for stopping all functions using the Emergency Stop button.
Steps to position the platform using platform or ground controls.
Instructions for steering the machine using the platform controls.
Instructions for driving the machine using the platform controls.
Procedure for determining slope grade and following ratings.
Explains diagnostic codes, overload conditions, and recovery.
Steps to remove and test the platform height restriction.
Instructions for properly securing the machine for transport.
Procedures for safely lifting the machine using a forklift.
Guidance on lifting points and center of gravity determination.
To Next Page
