Terex Genie GS-1930/32 User Manual

Operator's Manual
Serial Number Range
GS
-
1530/32
from GS3010A
-
110000
from GS3011C-10000
from GS3014D-101
AUS
Australia
GS
-
1930/32
from GS3010A
-
110000
from GS3011C-10000
from GS3014D-101
F
GS
-
2
032
from GS3211A-110000
from GS3212C-10000
GS
-
2
632
from GS3211A-110000
from GS3212C-10000
GS
-
3232
from GS3211A-110000
from GS3212C-10000
with
Maintenance
Information
GS
-
2
04
6
from GS4612A-110000
from GS4612C-10000
from GS4616D-101
GS
-
2
64
6
from GS4612A-110000
from GS4612C-10000
from GS4616D-101
GS
-
324
6
from GS4612A
-
110000
from GS4612C-10000
from GS4616D-101
GS
-
4047
from GS4712C-101
from GS4716D-101
Seventh Edition
Eighth Printing
Part No. T107028

Terex Genie GS-1930/32 Specifications

General

Gradeability	25%
Drive Motor	24 V DC
Width	0.76 m
Lift Capacity	500 lbs
Drive Speed - Elevated	3.2 km/h
Drive Speed - Lowered	3.2 km/h
Turning Radius (Outside)	2.13 m
Extension Deck Length	36 in
Power Source	Electric
Stowed Width	0.76 m

Summary

Introduction and Safety Guidelines

Introduction to Genie Equipment

Welcome to Genie equipment and user responsibilities.

Hazard Classification and Warnings

Explains safety decal types and critical alerts.

General Safety Practices

Overall rules for safe machine operation and hazard avoidance.

Personal Safety Measures

Requirements for operator's personal safety.

Work Area Safety Guidelines

Safety considerations for the operating environment.

Machine Identification and Controls

Machine Component Identification

Visual guide to identify parts of the Genie machine.

Ground Control Panel Operation

Instructions for operating controls from the ground.

Platform Control Panel Operation

Instructions for operating controls from the platform.

Inspection and Testing Procedures

Pre-Operation Inspection Procedures

Detailed steps for daily machine checks before operation.

Function Testing Procedures

Verifying all machine functions operate correctly.

Workplace Inspection Procedures

Assessing the safety of the operating area and surroundings.

Machine Operation and Handling

Machine Operation Basics

Procedures for starting, stopping, and basic machine movements.

Positioning Outriggers and Platform

Steps for extending/retracting outriggers and moving the platform.

Driving and Steering Operations

Instructions on how to drive and steer the Genie machine.

Transport and Lifting Instructions

Guidelines for safely moving and lifting the machine.

Maintenance and Specifications

Routine Maintenance Procedures

Checks for hydraulic oil, batteries, and scheduled servicing.

Genie Model Specifications

Technical details for various Genie GS models.