Need help?Do you have a question about the Terex Genie Z-34/22 and is the answer not in the manual?
General| Brand | Terex |
|---|---|
| Model | Genie Z-34/22 |
| Category | Boom Lifts |
| Language | English |
Conditions that must be met before operating the machine.
Maintain safe distances from electrical power lines to avoid electrocution.
Do not exceed platform capacity and beware of wind for machine stability.
Instructions for responding to tilt alarms and operating on slopes.
Adhere to limits for driving speed, wind, terrain, and slope operation.
Guidelines for safe use of the platform and managing loads.
Wear fall protection and avoid falling from the platform.
Be aware of blind spots and overhead obstructions to prevent collisions.
Precautions to prevent explosions and fires, especially during refueling.
Procedures for handling damaged or malfunctioning machines and maintenance checks.
Explanation of symbols, color coding, and signal words used on decals.
Identification and function of controls located on the platform.
Identification and function of controls located at the ground level.
Operator's responsibility for pre-operation inspection and routine maintenance.
Detailed list of items to check during the pre-operation inspection.
Procedure to check and maintain the proper hydraulic oil level.
Procedure to check and maintain the proper engine coolant level.
Procedure to check and maintain the proper engine oil level.
Procedures for checking battery condition, connections, and fluid levels.
Procedure for checking and maintaining proper tire pressure for safety and stability.
Purpose and procedure for testing machine functions to detect malfunctions.
Testing emergency stop, machine functions, tilt sensor, and auxiliary controls from ground.
Testing emergency stop, horn, foot switch, machine functions, and steering from platform.
Testing drive and braking systems, including travel alarm and stopping.
Testing lift/drive select and aircraft protection package functions.
Identifying and avoiding hazardous situations in the work area.
Operator's responsibility to follow safety rules and manual instructions.
Procedures for starting the engine and using auxiliary power.
Operating from ground controls and positioning the platform.
Operating from the platform for positioning, steering, and driving.
Determining slope grade and operating the machine safely on inclines.
Explanation of drive enable, speed select, and engine idle controls.
Responding to the machine not level indicator and tilt alarm.
Using aircraft protection and required fall protection equipment.
Procedures for safely parking and securing the machine after use.
Checking decals containing words to ensure they are legible and in place.
Diagram showing the location of various decals on the machine.
Checking decals containing symbols for legibility and placement.
Diagram illustrating the placement of decals with symbols on the machine.
Procedure for configuring the machine for winching during transport.
Steps for securing the machine chassis and platform for transport.
Instructions for safely lifting the machine using designated lifting points.
Detailed specifications for the 2WD Industrial version of the machine.
Detailed specifications for the 2WD and 4WD RT versions of the machine.
Diagram illustrating the machine's operational reach and movement capabilities.
To Next Page
