TES TES-1322 - Temperature Measurement; Infrared Measuring; Continuous Infrared Measuring

Cast iron (turned at 100℃)
0.45
Cast iron (tumed at 1000℃)
0.6 to 0.7
Steel (ground sheet) 0.6
Mild steel 0.3 to 0.5
Steel plate (oxidized) 0.9
Iron plate (rusted) 0.7 to 0.85
Cast iron (rough) rusted 0.95
Rough ingot iron 0.9
Molten cast iron 0.3
Molten mild steel 0.3 to 0.4
Stainless steel (polished) 0.1
Stainless steel (various) 0.2 to 0.6
Aluminum
Polished aluminum 0.1*
Aluminum (heavily oxidized) 0.25
Aluminum oxide at 260℃
0.6
Aluminum oxide at 800℃
0.3
Aluminum Alloys various 0.1 to 0.25
Brass
Brass (polished) 0.1*
Brass (roughened surface) 0.2
Brass (oxidized) 0.6
Copper
Copper (polished) 0.05*
Copper plate (oxidized) 0.8
Molten copper 0.15
Lead
Lead (pure) 0.1*
Lead (oxidized at 25℃)
0.3
Lead (oxidized , reated to 200℃)
0.6
Nickel and its alloys
Nickel (pure) 0.1*
Nickel plate (oxidized) 0.4 to 0.5
Nichrome 0.7
Nichrome (oxidized) 0.95
10
Ⅶ. TEMPERATURE MEASUREMENT
1. Infrared measuring :
a). Infrared measuring : Press MEAS button to power on
the meter and start measuring. Release MEAS button
to stop measuring and auto hold the reading, the meter
will be off automatically after 15 secs.
b). Under the Infrared measuring mode, press & hold
MEAS button and press MODE button to select MAX
measurement & General measuring mode.
2. Continuous infrared measuring
Start with power-off status, press MODE and MEAS
buttons to power on the meter, the Infrared Thermometer
can start the continuous measurement. In the meanwhile,
H symbol won’t appear in LCD, the Hold function is
unavailable.
a). Under continuous measurement, press MEAS button to
stop continuous measurement and lock the reading, the
meter will be off automatically after 15 secs.
b). Under continuous measurement, press & hold MEAS
button and press MODE button to select MAX
measurement & General measurement.
100cm
12.5cm
5in
40in
3.3in
8.3cm
50cm
20in
28cm
11in
2.8in
7cm
D : S = 8 : 1
spot center
laser
16mm
S
D
11