: Button for increasing the value of Parameters,
increasing the parameter rapidly.
:
Button for decreasing the value of Parameters,
decrease the parameter rapidly.
Note:
After finishing the setting procedure, the parameter
will be memorized until next setting.
Under mode settings, Backlight and Laser light
function will be disabled.
Ⅸ.BATTERY REPLACEMENT
1. As battery power is not sufficient, LCD will display
replacement with one new battery type 9V is required.
2. Open battery cover, then take out the battery from
instrument and replace with a new 9-Volt battery and place
the battery cover back.
14
TES ELECTRICAL ELECTRONIC CORP.
7F, No. 31, Lane 513, Rui Guang Road, Neihu Dist. Taipei.
Taiwan, R. O. C.
Tel : (02) 2799-3660 Fax : 886-2-2799-5099
E-Mail : tes@ms9.hinet.net http://www.tes.com.tw
Nov-2001-1
To Previous Page
Loading...
