Need help?Do you have a question about the TESA TESA-hite plus M 700 and is the answer not in the manual?
General| Resolution | 0.001 mm |
|---|---|
| Power Supply | Battery |
| Display | Digital |
| Battery life | 40 hours |
| Operating temperature | 10 to 40 °C |
| Storage temperature | -10 to 60 °C |
| Protection class | IP40 |
Covers unpacking and initial setup procedures for the instrument.
Introduces the fundamental principles and applications of measurement.
Provides step-by-step instructions for unpacking and preparing the instrument.
Outlines the steps for correctly contacting the workpiece during measurement.
Details how to determine the probe constant for length measurements.
Overview of the configuration menu and how to access its submenus.
Details how to measure perpendicularity and straightness deviations.
Covers accessing and performing 2D measurements on the instrument.
Explains how to perform various 2D analysis operations.
Guides on how to create a measurement programme using the 'Learn' mode.
Explains how to run pre-saved part programmes on the instrument.
Provides instructions for cleaning the instrument's guides and glass rule.
To Next Page
