TESA TESATRONIC TT60 User Manual

TESA SA
Bugnon 38 – CH-1020 Renens – Switzerland
Tél. +41(0)21 633 16 00 – Fax +41(0)21 635 75 35
www.tesatechnology.com – tesa-info@hexagon.com
Modification rights reserved – Printed in Switzerland – 4499.043.1611 – ME4499043
Instruments électroniques de mesure de longueur
Elektronisches Längenmessgerät
Electronic length measuring instrument
TT20 –TT60
Mode d’emploi
Gebrauchsanleitung
Instruction Manual

TESA TESATRONIC TT60 Specifications

General

Protection Class	IP40
Resolution	0.001 mm
Repeatability	±0.001 mm
Linearity Deviation	±0.002 mm
Accuracy	±0.003 mm
Display	LCD
Output Interface	RS-232
Power Supply	4 x AA batteries
Operating Temperature	0°C to +40°C
Storage Temperature	-10°C to +60°C

Summary

PRECAUTION

3 TECHNICAL DATA

Main features

Key specifications and capabilities of the TT20 and TT60 instruments.

4 MAIN FEATURES

4.1 Basic equipment

Lists the standard components and features included with the instruments.

4.2 Front side

4.3 Back side

5 GETTING STARTED

6 FUNCTION KEYS

6.1 Selecting the measuring functions

How to choose between different measurement functions like A, -A, B, -B.

6.2 Setting the Offset

Procedure for setting the zero point or offset for measurement channels.

6.3 Analogue measuring ranges

6.5 MEASUREMENT Mode; HOLD Mode «HOLD»

Explains how to switch between continuous measurement and holding the displayed value.

6.6 Tolerance Mode

How to enable and use the classification by LEDs and internal relays.

6.7 Memory Function (only for TT60)

8 CLASSIFICATION BY LED AND INTERNAL RELAY

8.1 Relay output classification wiring diagram

8.2 Connection diagram for R-M control entry

8.3 Using a PLC control unit

8.4 Classification output 5 to 40 classes within tolerances (TT60)

9 ACCESSIBLE FUNCTIONS, SELECTION BY SWITCH

9.1 External measurement

9.3 Calibration mode

Instructions for calibrating the instrument.

9.4 Locking the Keyboard

9.7 Analogue output (TT60)

10 ACCESSIBLE FUNCTIONS BY RS232

11 ERROR MESSAGE