TESA TESA-hite 400 User Manual

TESA-hite 400 / 700
Instruction manual
TESA-hite 400 / 700

TESA TESA-hite 400 Specifications

General

Resolution	0.0001 mm
Accuracy	±0.2 µm
Display	LCD
Repeatability	0.001 mm
Power Supply	Rechargeable battery
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C

Summary

Installation

Unpacking and setting up

Starting the instrument

Explains how to turn on and initialize the TESA-Hite 400/700, including display indicators.

Short instructions for use

Description of the components

Power supply

Measuring system

Automatic measuring value correction

Measuring

Basic principles

Outlines the fundamental principles and considerations for taking measurements.

Display and function keys

Explains the instrument's display symbols and the functions of the key buttons.

Definition of display symbols

Provides a detailed guide to understanding the various symbols shown on the instrument's display.

Program functions

Details the different measurement modes and program functions available.

Probing procedure at the contact point

Describes the correct method for bringing the probe into contact for accurate readings.

Establishing the probe constant for length measurements with inversion of the probing direction

Explains how to set the probe constant, especially when changing probing direction.

Measuring features with cylindrical surfaces

MODE 1 Measuring lengths in one direction, without probe constant

Instructions for using Measurement Mode 1 for unidirectional length measurements.

MODE 2 Measuring lengths in two directions, with probe constant

Procedure for detecting the culmination point

Explains the automatic process for finding the highest or lowest point on a surface.

PRESET function

Measuring parallelism deviations

Measuring perpendicularity deviations

Instrument configuration

Use of the fine adjustment

Error messages

Maintenance

Charging the battery

Warranty