TESA CLINOBEVEL 3 User Manual

V13 – 26.03.2019
1
Instruction Manual
TESA CLINOBEVEL 3
ELECTRONIC INCLINOMETER
05330210 : TESA CLINOBEVEL 3 ± 60°, Cast iron, rust protected
05330211 : TESA CLINOBEVEL 3 ± 60°, Aluminium, black anodized
05330212 : TESA CLINOBEVEL 3 ± 10°, Cast iron, rust protected
05330213 : TESA CLINOBEVEL 3 ± 10°, Aluminium, black anodized
05330214 : TESA CLINOBEVEL 3 High Precision ± 1°, Cast iron, rust protected
This document is confidential and only to be used internally by the company that has purchased one of the inclinometers
mentioned above. Before duplicating or transmitting it to third parties without any connection to the use of these instruments,
an official request has to be sent to TESA.

TESA CLINOBEVEL 3 Specifications

General

Brand	TESA
Model	CLINOBEVEL 3
Category	Measuring Instruments
Language	English

Summary

1 INTRODUCTION

1.1 Acknowledgements

Expresses gratitude to users for choosing TESA products.

2 PRESENTATION

2.4 How to switch the instrument ON and OFF

Provides instructions for powering the instrument on and off, including auto-shutoff.

2.5 Key functions

Explains the specific functions and actions associated with each key.

3 DISPLAY

3.1 Scaling of the display

Explains options for adjusting display precision and range, linear vs. logarithmic.

4 TECHNICAL SPECIFICATIONS

5 DELIVERY CONTENTS

5.1 System components

Lists the essential elements included with each instrument configuration.

6 INSTALLATION, SECURITY & MAINTENANCE

6.2 Place of use

Precautions to consider for correct instrument placement and usage.

7 FUNCTIONS

7.2 Set absolute zero

Details the procedure for establishing an absolute zero reference for measurements.

8 OPTIONS

8.2 Set PIN code

Describes how to set a PIN to protect instrument settings from unauthorized changes.

10 ERROR MESSAGE