11
FACTORY RESET
DAB is a terrestrial system and frequencies in dierent
areas vary. If you move the radio to another part of the
country, performing a scan may not be enough to re
program the radio you may need to reset the radio.
Factory reset is an option available from the Advanced
Settings menu.
To restore the factory settings
Follow the instructions in the ‘DAB SETTINGS MENU •
section to select Factory Reset from the menu.
The Radio will now re-start and scan the DAB broadcast
stations in your area.
After reset all settings are returned to the factory defaults
and any stored presets are erased.
The AUX IN input may be used to connect sound sources
with a Line or Headphone analogue output to play
through your unit. These may include -
Personal audio players•
Personal computers or laptops•
Connecting to the Aux-In jack
Connect a stereo 3.5mm jack cable (not supplied) •
between the headphone or LINE/AUX output of the
personal audio player and the Aux-In jack on the back
panel.
AUX INPUT
Playing the AUX source
Press the • Mode button repeatedly to select AUX IN
Mode.
‘Auxiliary Input’ will be displayed.
Set your personal audio player/computer to PLAY.•
Set the listening volume to the level you want.•
If there is no sound or if the volume level is not loud
enough, you may need to increase the volume setting on
your personal audio player/computer.
To Next Page
Loading...
