MORE ABOUT STRAIGHT STITCHING
Straight Stitching Centre Needle Position
Turn the pattern selector dial so that “A” appears in the stitch display window.
Adjust the stitch length by turning the stitch length dial to the desired stitch
length.
To get a reinforced triple straight stitch, turn the stitch length dial to position “S1”.
Straight Stitching Right Needle Position
Turn the pattern selector dial so that “B” appears in the stitch display window.
Adjust the stitch length by turning the stitch length dial to the desired stitch
length.
To get a reinforced triple straight stitch, turn the stitch length dial to position “S1”.
STITCH LENGTH DIAL
STRAIGHT STITCHES
STITCH DISPLAY WINDOW
PATTERN SELECTOR DIAL
REVERSE SEWING SWITCH
Page 17
To Next Page
Loading...
