Tesco EJ09 - Connecting Power; Power Connection Steps

1
2
B
A
C
CONNECTING POWER
A: Switch the machine’s Power Switch OFF – “0” position
B: Plug in the Machine Power connector rmly.
C: Place the Foot Controller in a convenient unobstructed place.
D: Plug in the Mains Plug to the mains supply and switch on.
E: Adjust the position of the foot controller (see Fig. 2 below)
Now remove your foot from the control.
F: Switch the machine’s Power Switch ON – “I” position
Your sewing machine is now ready for use.
C
D
E
F
Page 8