What to do if my Tesla Dryer does not start?
If your Tesla Dryer isn't starting, make sure it's properly connected to the mains and turned on. Ensure the door is fully closed and the desired program is correctly set. Finally, press the start button to initiate the drying cycle.
How to improve drying performance of Tesla WT10H90M?
If your Tesla Dryer isn't reaching the desired dryness level or the drying time is too long, try the following: 1. Clean the lint filter and heat exchanger. 2. Empty the water container. 3. Check the drain hose for blockages. 4. Ensure the installation location allows for proper ventilation, keeping the air inlet clean. 5. Select a higher drying intensity level program or use a time program.
What does the lint filter icon mean on a Tesla WT10H90M?
If the " " icon is illuminated on your Tesla Dryer, clear the lint filter.
What to do if the water container icon is lighting on my Tesla WT10H90M Dryer?
If the " " icon is lighting on your Tesla Dryer, first check the water container and empty it if it's full, then restart the dryer. If the container isn't full, restart the dryer directly. If the icon persists after these steps, please call for service.
Why is the display not working on my Tesla WT10H90M?
If the display on your Tesla Dryer is not on, verify that the power supply is working and the mains plug is properly inserted. Also, check the selected program and press the power button.
Why is my Tesla Dryer making humming noises?
Humming noises from your Tesla Dryer indicate that the compressor is operating. These noises are normal during operation and do not indicate a fault.
Why does my Tesla WT10H90M turn off automatically after the program ends?
Your Tesla Dryer switches off automatically at the end of the program to save energy. This is a normal function, not an error.
To Next Page
General