6
ENG
Plug in
On Select program Select function
or default
Start
Load Close the door
Before using, please make sure it’s installed properly.
OPERATIONS
Quick start
Drying
NOTE
Open the door and
take out laundry
Buzzer beep or “0:00”on display.
Pull out the
container
Pour out
condensate water
Clean the filter Power off
After Drying
NOTE
If use the socket with a switch, please press the switch to turn off the power directly.
Before Each Drying
NOTE
• Leave it to stand for 2 hours after transporting. Before first use, please use the soft fabric to clean the inside
drum.
1. Put some clean rags into the drum.
2. Plug the power, press
3. Select the Programme, press button.
4. After finishing this programme, please follow the “cleaning and care” to clean the filter door.
• During drying, the compressor and the water will generate some noise which is entirely normal.
To Next Page
Loading...