9
ENG
Intensity
You can adjust the dryness level of the laundry by pressing the button.
There are four grades.
1. The intensity function can be activated only before the programme starts.
2. Press the button repeatedly to select the drying grade.
3. Except the , , , programme, all the other programmes can be
adjusted with the function.
Time
When the or programme is selected, the button can be used to adjust
the drying time in 10 min. steps.
Lamp
The drum light will be on for 3 minutes when the button is pressed or 1 minute when the door is
open.
Signal
Set the buzzer on or off. In default condition, the buzzer is on.
When the buzzer is on:
1. The dryer will affirm pressed function button by a sound.
2. If the programme knob is rotated during the dryer is running, the buzzer will remind the user
that this is an invalid operation.
3. When the drying programme is done, the buzzer will beep.
Clean & Safe
After selecting the program, you can choose the “Clean & Safe” function according to your needs.
Press to select this function.
Press it again to cancel. After selecting the “Clean & Safe” function, the clothes are sterilized during
the drying process, making the clothes cleaner and safer.
Use this function with caution for light, thin or delicate laundry.
Intensity
Time
Lamp
Signal
Clean &
Safe
Child Lock
1. This machine incorporates a special child safety lock, which can prevent children from carelessly
pressing buttons or making the faulty operation.
2. When the drying cycle is running, press the and buttons at the same time for 3
seconds to start child lock function.
3. When child lock function is set, the display will show Child lock icon and all button are
deactivated, except button.
4. To deactivate the child lock function, the and buttons shall be pressed at the same
time for 3 seconds.
Child
Lock
To Next Page
Loading...