7
4.1 Status Indicators
Status indicators show the status of system functions such as system power and internal
battery charge level.
Icon Name LED State Remarks
Wireless Blue Wireless LAN is in use
HDD Green RSWA is accessing the built-in hard disk
Battery Green Battery fully charged
Orange Battery charging
Flashing red Battery power critically low
Power Blue Power is on and the battery is in use
Flashing blue Power is in suspend mode
Table 4.1 System status indicators
4.2 System States
On Mode
The system is running and the display screen is on.
Idle Mode
Some system functions are regulated or turned o to conserve power. The display
screen may be turned o. The system returns to the On state when pen activity or
other input is detected.
Suspend-to-RAM Mode
System operation is suspended. Most system functions are turned o to conserve
power. Power to memory is on, maintaining data in programs that were running
before system operation was suspended. The system does not respond to the pen or
other input when in Suspend-to-RAM mode. Push the power button return back to
On state.
Save-to-Disk Mode
System operation is suspended. All system functions are turned o to conserve
power. Active data in programs that were running before suspending system op-
eration is stored on the hard disk drive. The system does not respond to the pen or
other input. Push the power button return back to On state.
To Next Page
Loading...
