5. Operation 9
²
Switching tthe iinstrument ooff:
i Press and hold (for approx. 2s) until the display
goes out.
5.3 Switching the display
light on / off
²
Switching tthe ddisplay llight oon/off:
The instrument is switched on.
i Press .
5.4 Performing settings
1
To oopen cconfiguration mmode:
The instrument is switched on and is in measurement
view. Hold, Max or Min are not activated.
i Press and hold (for approx. 2s) until the display
changes.
- The instrument is now in configuration mode.
You can change to the next function with .
You can leave configuration mode at any time. To do
so, press and hold (for approx. 2s) until the
instrument has changed to measurement view. Any
changes that have already been made in configuration
mode will be saved.
2
To sset tthe aalarm ffunction:
Configuration mode is opened, ALARM is lit.
1 Select the desired option with / and confirm
with :
· oFF: Switches the alarm function off.
· on: Switches the alarm function on.
oFF was selected:
º Continue with objective TO SET THE MAX./MIN. PRINT
FUNCTION
.
de
enfresitptsvnl????
To Next Page
Loading...
