TESTO 270 BT - Configuring the Instrument; Setting Options in the Configuration Mode

6 First steps
15
6.5 Configuring the instrument
6.5.1 Setting options in the configuration mode
The settings required for measurements can be defined partly directly
on the device, partly additionally or exclusively via the testo Smart App.
Configurations
Setting options
Setting the TPM limit values
Only possible via app
Carry out calibration
Only possible via app
Automatically switch off the
instrument Auto-off
on: Instrument switches off automatically after
2 or 10 mins.
off: No automatic switch-off.
Additionally possible via app
Set alarm indicator
Only possible via app and after registration
Set temperature unit
°C, °F
°C or °F
Additionally possible via app
Lock configuration, including
TPM limit values
Only possible via app
Reset the adjustment value
Only possible via app
Firmware version
Firmware versions of the product components
are shown.
Possible via device or app:
Bluetooth
on: Bluetooth activated
off: Bluetooth deactivated