testo 310 flue gas analyser
Brief instructions
These brief instructions provide an overview over the most important functions
of the product. Before using the product, you must read and follow the
instruction manual!
The instrument has two configuration menus. The menu that is
opened depends on the instrument status when called up.
Commissioning/instrument configuration menu
Area version, measurement units, time and date can be set.
When the instrument is switched on initially, the configuration menu is
opened automatically.
1. Switch the instrument on: hold down [] until all segments are shown on
the display.
2. Open instrument configuration menu: Press right function key [set] during
the initialisation phase.
3. Make settings:
[] switches to the next parameter, while [esc] takes you to the
previous parameter.
Parameter Explanation
ArEA (area
version)
Selecting the area version activates different calculation
formulas and associated measurement parameters.
> Select area version code: [▲] and [▼].
1: USA, HU, IN, KR / 2: GB, RU, DK, AU, JP, CN / 3: NL,
SE, TR, RO / 4: DE, AT, CH, CZ, FR, ES, BE, PL, PT, AR,
BR / 5: IT
> Confirm the entry: [OK].
UnI
Only when area version 5 is selected
> Measurement procedure according to UnI norm: activate
[On] / deactivate [OFF].
Pressure,
temperature
> Select the unit: [▲] and [▼], confirm the entry: [OK].
To Next Page
Need help?
General
