TESTO 550i - Searching for and Deleting Measurement Results; Sensors

8 Using the product
30
8.6.1 Searching for and deleting measurement
results
In the Memory menu, all stored measurements are sorted by date and time.

The Memory menu is open.
1
Click on .

Search field with measurements opens.
2
Enter the customer name or measuring site or date/time in the search
field.
If a customer is not created before a measurement, user will be able to
create a customer and measuring site after the measurement is
complete. Select the measurement and enter customer details. Refer to
section 8.5.2.

The result is displayed.
Deleting
1
Click on .

A check box is displayed in front of each measurement.
2
Click on the required measurement.

A tick is displayed in the respective box.
3
Click on .

Information window is displayed.
4
Acknowledge the information.

Selected measurements were deleted.
8.7 Sensors
All sensors used with the App can be found in the Sensors menu. There,
you can view general information about currently connected probes as well as
recently connected probes.