Need help?Do you have a question about the TESTO 550s and is the answer not in the manual?
General| Accuracy Pressure | ±0.5% of full scale |
|---|---|
| Connectivity | Bluetooth |
| Protection Class | IP54 |
| Product Type | Digital Manifold |
| Pressure Range (High Side) | 0 to 60 bar |
| Measurement Range Pressure | -1 to 60 bar |
| Measurement Range Temperature | -58 to 302 °F |
| Accuracy Temperature | ±0.9 °F |
| Resolution Pressure | 0.01 bar |
| Resolution Temperature | 0.1 °C |
| Battery Life | 250 h |
| Refrigerant Compatibility | R134a, R404A, R407C, R410A, R507, R22, R32, R1234yf, R1234ze, R448A, R449A, R452A, R513A, R600a, R290 |
| Bluetooth Range | 150 m |
| Connections | 3 x 7/16" UNF |
| Weight | 0.8 kg |
| Measurement Parameters | Pressure, Temperature |
| Operating Temperature | 14 to 122 °F |
| Storage Temperature | -4 to 140 °F |
Instructions for correctly inserting and replacing batteries in the instrument.
Procedure for powering the instrument on and off.
Guided process for initial instrument setup, including language selection.
Steps required before starting a measurement, including valve positioner operation.
Determining system measuring values like pressure and temperature for refrigeration.
Procedure for removing foreign gases and moisture from the refrigeration circuit.
Checking system leak tightness using temperature-compensated pressure measurements.
Calculating target superheat using Smart Probes for split AC systems.
Performing a compressor test using three temperature probes.
Measuring temperature differences between two points.
Establishing Bluetooth connections with wireless probes and the testo Smart App.
Steps to connect the instrument to a tablet or smartphone via Bluetooth.
To Next Page
