7 Maintaining the product
26
3. Navigate to the saved measuring protocol.
4. Align IR interfaces testo 570 and testo printer.
5. Select Print.
- The printout is generated.
The saved measuring protocols can be viewed through the
software Easy Kool.
7 Maintaining the product
Cleaning the instrument
> If the housing of the instrument is dirty, clean it with a damp
cloth.
Do not use any aggressive cleaning agents or solvents! Weak
household cleaning agents and soap suds may be used.
Keeping connections clean
> Keep screw connections clean and free of grease and other
deposits, clean with a moist cloth as required.
Removing oil residues
> Carefully blow out oil residues in valve block using compressed
air.
Ensuring the measuring accuracy
Testo Customer Service would be glad to further assist you if you
so wish.
> Check instrument regularly for leaks (recommended: annually).
Keep to the permissible pressure range!
> Calibrate instrument regularly (recommended: annually).
Changing batteries/rechargeable batteries
When the battery/rechargeable battery is changed,
customer-specific settings such as date/time are reset to
the factory settings.
Shop for Data Logging products online at: www.DataLoggerStore.com 1.877.766.5412
To Next Page
Loading...
