TESTO 570 - Error Reporting and Solutions; Accessories and Spare Parts List

8 Tips and assistance
29
8.3. Error reports
Question Possible causes/solution
---- is lit up instead of
measurement parameter
display
Sensor or cable defective
> Please contact your dealer or
Testo Customer Service
Display EEP FAIL
Eeprom defective
> Please contact your dealer or
Testo Customer Service
If you have any questions, please contact your dealer or Testo
Customer Service. The contact details can be found on the back of
this document or on the Internet at www.testo.com/service-
contact
8.4. Accessories and spare parts
Description Article no.
Clamp probe for temperature measurement
on pipes
0613 5505
The pipe wrap probe with Velcro tape for
pipes with a diameter of up to 75 mm, Tmax.
+75 °C, NTC
0613 4611
Water tight NTC surface probe 0613 1912
Sturdy precision NTC air probe 0613 1712
Pipe wrap probe for pipe diameters from 5 to
65 mm
0613 5605
Clamp probe for measuring current
consumption on compressors with switchable
measuring range
0554 5607
Oil pressure probe to check the oil filling level
in the compressor
0638 1742
Power supply unit, 5 VDC 500 mA with Euro
plug, 100-250 VAC, 50-60 Hz
0554 0447
Software EasyKool 0554 5604
High speed Testo printer with wireless
infrared interface, 1 roll of thermal paper and
4 AA-batteries
0554 0549
Shop for Data Logging products online at: www.DataLoggerStore.com 1.877.766.5412