6 Using the product
30
6 Using the product
Pos: 29 /TD/Produk t verwenden/testo 622/ testo 622 Inbetriebn ahme @ 4\mod_1254471440026 _79.doc @ 51077 @ 2
6.1. Commissioning
The date and time must be set on commissioning.
1. Select the required function with [Set].
If no button is pressed > 30 sec, the testo 622 changes to
Measuring Mode. To perform additional settings, press and
hold [Set] for 2 sec.
> The adjustable parameter flashes.
2. Set values with [] or [] and confirm entry with [Set] (for
settings, see following table).
To scroll rapidly forward and back in the relevant menu,
press and hold [
or ].
Press [Esc] to cancel settings without saving them.
Hold [Set] down for 2 s to save previously set values and
leave the menu.
- Instrument returns to the display.
Display Function Setting option
DD.MM.YYYY flashes
or
MM.DD.YYYY flashes
Set date format
DD.MM.YYYY = day,
month, year
MM.DD.YYYY =
month, day, year
Year flashes Set year 2009 - 2099
Month flashes Set month 01 - 12
Day flashes Set day 01 - 31
24H or 12H (AM/PM)
flash
Set time format 24h/12h
Hour flashes Set hour value 00 - 23 or 01 - 12
Minute flashes Set minute value 00 - 59
Second flashes Set second value 00 - 59
°C flashes Set unit for
temperature
°C/°F
Update date & time f lashes activate Yes / deacti vate No activate Yes / deactivate No
If the power supply is interrupted the settings are being
saved for at least 3 min.
To Next Page
Loading...
