TESTO 635 - Mean (635-2 Only)

50
²
Programming aand aactivating tthe AAUTO mmeasuring pprogram:
 The main menu is open, Menu is displayed.
1 Meas.Prog ¬ .
2 Press / to select AUTO and confirm with .
The measuring cycle is set in the order: hours /minutes/seconds.
3 Press / to set the measuring cycle in hours and confirm with
.
4 Perform the setting for minutes and seconds as described in step 3.
5 Press / to set the number of readings and confirm with .
- The instrument returns to measurement view.
6.2.3 Mean (635-2 only)
Timed
The mean is formed as a moving mean value.
²
Activating ttimed mmean ccalculation:
 The main menu is open, Menu is displayed.
1 Mean ¬¬Timed ¬ .
2 Press to start mean calculation.
Press to stop mean calculation.
Multi-point
The mean is formed as a moving mean value.
²
Activating mmulti-ppoint mmean ccalculation:
 The main menu is open, Menu is displayed.
1 Mean ¬¬Multi-poi ¬ .
2 Press to include readings.
Press to stop mean calculation.
End
Pick
OKOK
Stop
Start
OKOK
OK
OK
OK
OK
6. Setting the instrument