21
Temperature measurement
0.01 °C resolution for Pt100 and thermocouple probe
i
Function buttons
Pt100 probes are generally shown with a resolution of 0.01 °C. This
resolution is possible for a reading of max. +299.99°C and min.
99.99°C. At temperatures outside this range, the symbol for a
disconnected probe is (- - - - -). If you wish to measure above +299.99
°C or below -99.99°C, you have to switch to a resolution of 0.1 °C
beforehand: allocate “0.1...0.01” to function button and activate.
The switch-over is only possible if a measurement program is not
activated. It must otherwise be cancelled beforehand.
Switch thermocouple probe with EEPROM following adjustment to a
0.01 °C resolution.
The following also applies: maximum measured value = +299.99 °C
minimum measured value = -99.99°C
To Next Page
Loading...
