TESTO 650 - Page 57

57
-200 to +600 °C
Class A
75
75
0604.9773
0628.0017*
Ordering data
* with EEPROM: • Measuring range limits are stored in the probe
• Adjustment possible at 1 measuring point • Surface correction in surface probe can be adapted to measuring task
-200 to +1250 °C
Class 1
60
1.5 m PVC
0600.5993
0363.1712
All Class 1
-200 to +900 °C
-200 to +900 °C
-200 to +1100°C
-200 to +1100°C
3,5
3,5
3,5
3,5
0600.5393
0600.5493
0600.5793
0600.5893
PUR coiled cable
0600.5593
0604.9794
0614.9794*
-200 to +400 °C
Class 1
3
0604.0293
0614.0293*
-200 to +600 °C
Class 1
1
0604.0593
0614.0593*
1
-200 +1100 °C
Class 1
-200 to +600 °C
Class 1
<1
-200 to +400 °C
Class 1
1.5 m
Silicone
0600.2593
3
0604.0493
0614.0493*
Quick-action immersion/penetration probe
Rated length = 150 mm, probe tip: Ø 3 mm
Super quick-action immersion/penetration probe for meas. in
liquids; rated length = 150 mm, probe top: Ø 1.5 mm
Super quick-action immersion/penetration probe for high
temperatures, rated length = 470 mm, probe tip: Ø 1.5 mm
Super quick-action immersion/penetration probe for
measurements in gases and liquids with a thin tip low
in mass; rated length = 150 mm,
probe tip: Ø 0.5 mm
Robust immersion/penetration probe made of V4A steel,
water-tight and oven-proof, e.g. for the food sector;
rated length = 150 mm, probe tip: Ø 3 mm
Smelting probe for measurements in non-ferrous
meltingbaths with exchangeable bent measuring tips.
Lifetime of measuring tip: up to 500 measurements in
aluminium melting baths
Spare measuring tip
Plug-in measuring tips for high temperatures, bendable.
Please also order handle (see below).
a)Outer casing: stainless steel 1.4541
b)Outer casing: stainless steel 1.4541
c)Outer casing: Inconel 2.4816
d)Outer casing: Inconel 2.4816
Handle for plug-in measuring tips
Pt100 air probes for testo 950. 650, 400
Standard air probe
Rated length = 150 mm, Ø probe tip: 9 mm
Precision air probe
Rated length = 150 mm, Ø probe tip 9 mm
NiCr-Ni immersion/penetration probes
for testo 950, 650, 400
Meas. range/Accuracy
t
99
s
Connection
cable
Part no.
Plug-in head
Please order
connection cable (p. 61)
** 1/10 Class B (0 to +100 °C)
1/5 Class B (rem. range)
to DIN IEC 751
-100 to +400 °C
1/10 Class B**
Plug-in head
please order
connection cable ( p. 61)
Plug-in head
please order
connection cable ( p. 61)