TESTO 650 - Page 58

58
Ordering data
Please order
adapter
0600.1693
0644.1109
Pack
of 5
Highest temp. +400 °C
Highest temp. +200 °C
0644.1607
Packung
à 2 Stk.
0.3 m PVC
0600.1693
0 to +120 °C
± 0.5 °C (0 to 50 °C)
± 1 °C (50 to 120 °C)
1.5 m
0554.0670
-18 to +260 °C
2
0600.0750
PUR coiled
cable
0554.0004
Standard immersion/penetration probe
Rated length = 200 mm, Ø probe tip: 3 mm
Precision immersion/penetration probe
Rated length = 200 mm, Ø probe tip 3 mm
Protective glass for
immersion/pen. probe 0604.0273 and 0628.0015
Flexible precision immersion probe
Rated length = 1000 mm,
Robust probe with sharpened measuring tip,
water-proof and oven-proof
Rated length = 150 mm, Ø probe tip 3 mm
NiCr-Ni thermocouples for testo 950, 650, 400
T/C made of fibre glass insulated thermal pipes
Insulation: twin conductor, flat, oval, opposed and covered with fibre glass, both
conductors are wrapped together with glass fibre and soaked with lacquer;
wire: Ø 0.2 mm; outer: Ø 1 x 0.8 mm
Adhesive thermocouple, base material: aluminium foil
Is fixed at the measuring point using conventional adhesives or silicone heat
paste, Part no. 0554.0004, Ø extension 2 x 0.2 mm, thickness 0.1 mm
Adapter to connect NiCr-Ni thermocouples and
probes with open wire ends
Other temperature probes
for testo 950, 650, 400
Globe thermometer to measure radiant heat, NTC
sensor, Ø ball: approx. 150 mm
Corresponds to following requirements: ISO 7243, ISO 7726, DIN EN 27726,
DIN 33403.
Infrared probe for non-contact temperature
measurement on live, inaccessible and rotating parts
Accessories for temperature probes
Silicone heat paste (14g), Tmax = +260 °C
* With EEPROM: • Measuring range limits are stored in the probe
• Adjustment at 1 measuring point • Surface correction in surface probe can be adapted to measuring task
-200 to +400 °C
Class A
20
0604.0273
-100 to +400 °C
1/10 Class B**
30
0628.0015*
-200 to +600 °C
Class A
30
1.5 m
silicone
0604.2573
0554.7072
-100 to +400 °C
1/10 Class B**
80
in
Wasser
0628.0016*
** 1/10 Class B (0 to +100 °C)
1/5 Class B (remaining range)
to DIN IEC 751
Plug-in head
please order connection
cable (p. 61)
Plug-in head
please order connection
cable (p. 61)
Plug-in head
please order connection
cable (p. 61)
Pt100 immersion/penetration probes
for testo 950, 650, 400
Meas. range/Accuracy
t
99
s
Connection cable
Part no.
Please order
adapter
0600.1693