59
Ordering data
Standard room conditions probe for
measurements up to +70 °C
Ø 12 mm (probe tip)
Duct humidity/temperature probe,
telescopic extension can be connected,
Ø12 mm
Telescope, length: 340 - 800 mm
Highly accurate reference
humidity/temperature probe, Ø 21 mm
Flexible humidity probe with mini module
for measurements, e.g. on material test
rigs. Length of module cable: 1500 mm
Thin humidity probe incl. 4 plug-on
protective caps for room climate
measurements, measurements in exhaust
air ducts and equilibrium moisture
measurements.
0 to 100 % RH
(probe tip)
-20 to +70 °C
± 2 % RH (2 to 98 % RH)
± 0.4 °C(0 to 50 °C)
± 0.5 °C (rem. range)
<12
at
2 m/s
0636.9740
0 to 100 %RH
(probe tip)
-20 to +70 °C
± 2 %RH (2 to 98 % RH)
± 0.4 °C (0 to 50 °C)
± 0.5 °C (rem. range)
<12
at
2 m/s
3 m
PUR
0636.9715
0430.9715
0 to 100 %RH
(probe tip)
-20 to +70 °C
± 1 % RH (2 to 98 % RH)
± 0.4 °C (0 to 50 °C)
± 0.5 °C (rem. range)
<12
at
2 m/s
0636.9741
0 to 100 %RH
-20 to +125 °C
± 2 % RH (2 to 98 % RH)
± 0.4 °C (0 to 50 °C)
± 0.5 °C (rem. range)
20
0628.0013
* Accuracy data at rated temperature of +25 °C,
Temperature coefficient: ±0.03 % / °C
Add. probes for testo 950, 650, 400
CO probe
CO
2
probe
Leak detection probe
Mechanical rpm probe with plug-in head.
Current/voltage cable (±1 V, ±10 V, 20 mA)
0 to 500 ppm
±5 ppm (0 to 100 ppm)
±5 % of m.v. (rem. range)
0632.1247
0 to 1 vol. % CO
2
0 to 10,000 ppm CO
2
50 ppm ±2% of m.v.
(0 to 5000 ppm)
100 ppm ±3% of m.v.
(rem. range)
0632.1240
0554.0007
20 to 20.000 rpm
0.33 to 333 Hz
±1 digit
0640.0340
0 to 20mA/4 20mA 0
± 1V/0 ± 10V
± 0.04 mA
± 0.001 V / ± 0.01 V
Meas. range Accuracy *
Part no.
t
99
s
Connection cable
Please order connection
cable (p. 61)
Humidity/temperature probes for air conditioning and ventilation sector for testo 650, 400
Plug-in head
Please order
connection cable (p.61)
Plug-in head
Please order
connection cable (p.61)
Plug-in head
Please order
connection cable (p.61)
0 to100 %RH
-20 to +70 °C
±2 %RH (2 to 98%RH)
±0,4 °C (-10 to 50°C)
±0,5 °C (rem. range)
<15
Plug-in head
Please order
connection cable (p.61)
0636.2130
0554.0528
0/4...20mA
±0,04 mA
Plug-in head.
Connection cable
0430 0143 or 0430
0145 requiredh
4...20mA-Interface for connection
and intermittent power to transmitters