Need help?Do you have a question about the TESTO 6621 and is the answer not in the manual?
Guidance on preventing harm to users and equipment, emphasizing proper handling and maintenance.
Defines the measured physical quantities: relative humidity (% RH) and temperature (°C/°F).
Specifies the operational limits for humidity (0-100% RH) and temperature (-20 to +70 °C).
Details the measurement precision for humidity and temperature, including tolerance values.
Describes the available analog output signals (e.g., 0-10 V, 4-20 mA) for data transmission.
Detailed instructions for connecting the testo 6621 transmitter, including 2-wire/4-wire technology.
Procedure for calibrating the transmitter using an adapter and a reference measuring instrument.
Guidance on installing the P2A Software, USB drivers, and performing software updates for the testo 6621.
Procedure for performing a single-point calibration of the testo 6621 using a reference instrument.
Steps for performing a two-point calibration for humidity and temperature using a humidity generator.
Guidance on preventing harm to users and equipment, emphasizing proper handling and maintenance.
Defines the measured physical quantities: relative humidity (% RH) and temperature (°C/°F).
Specifies the operational limits for humidity (0-100% RH) and temperature (-20 to +70 °C).
Details the measurement precision for humidity and temperature, including tolerance values.
Describes the available analog output signals (e.g., 0-10 V, 4-20 mA) for data transmission.
Detailed instructions for connecting the testo 6621 transmitter, including 2-wire/4-wire technology.
Procedure for calibrating the transmitter using an adapter and a reference measuring instrument.
Guidance on installing the P2A Software, USB drivers, and performing software updates for the testo 6621.
Procedure for performing a single-point calibration of the testo 6621 using a reference instrument.
Steps for performing a two-point calibration for humidity and temperature using a humidity generator.
General| Humidity Range | 0 to 100 %RH |
|---|---|
| Protection Class | IP65 |
| Measurement Parameters | Temperature and Humidity |
| Humidity Accuracy | \u00b12 %RH (5 to 95 %RH at 25 °C) |
| Output Signal | 4 to 20 mA |
| Power Supply | 12 to 30 VDC |
| Operating Conditions | Non-condensing |
| Housing Material | Plastic (ABS) |
To Next Page
