TESTO 6621 - First steps; Software and Driver Installation

testo P2A Software - Using the product 21
First steps
Installing the software / driver
The CD supplied with the testo 6621 contains an update of the P2A Software
including all the latest instrument drivers. Install this update once you have
installed the P2A Software (0554 6020).
Administrator rights are required for the installation of the testo P2A
Software.

Installing the P2A Software:
1 Insert the “P2A Software” CD (0554 6020).
If the installation program does not start automatically:
 Start Setup.exe file from the CD-directory (access via My Computer or
Windows Explorer).
2 Follow the instructions of the installation program.

Installing the USB drivers:
The USB driver CD is supplied with the P2A Software.
Before installing the USB drivers, please read the separate documentation
enclosed with the USB driver CD.
The installation of the USB driver is the prerequisite for the faultless use of
the P2A software.

P2A Software update:
1 Insert the product CD (supplied with the testo 6621).
If the installation program does not start automatically:
 Start Setup.exe file from the CD-directory (access via My Computer or
Windows Explorer).
2 Follow the instructions of the installation program.
Starting the software

Starting the program:
 Select: > Programs > Testo > P2A Software.
defresitptsvnl????