TESTO 945 - 6 Measurement Data; Measurement Logs

In order to read out and edit measurements, the
connection must first be opened and then closed
again after a measurement.
6.1 Measurement logs
Reading out measurement logs
1
Highlight measurement log: .
2
Open context menu: .
3
Read out logs:
Read oout ddata aand oopen
.
-
The data saved is shown in a table.
Saving logs in archive
1
Highlight measurement log: .
2
Open context menu: .
3
Copy logs:
Copy
.
4
Highlight site or folder in archive: .
5
Open context menu: .
6
Insert log:
Paste
.
Joining measurement logs
Prerequisites:
·
Same unit (°C, %RH, etc.)
·
Same duct cross-section (testo 445)
·
Same offset setting (testo 945)
1
Highlight measurement log: .
2
Drag log to data area: .
3
Highlight next log and drag to data area.
4
Confirm query:
Should the data be pasted here? :
.
34
6. Measurement data
6. Measurement data