Need help?Do you have a question about the TestSafe miniPAT and is the answer not in the manual?
Emphasizes electric shock risks and the importance of following manual instructions for safe operation.
Introduces the miniPAT as a simplified PAT tester suitable for IT equipment and general appliance safety checks.
Explains the overall result indicators for Class I and Class II appliances, indicating a pass when green.
Details safety requirements for Class I appliances, including earth wire connection and pass indicators.
Guides on battery installation, low battery warnings, and recommended calibration intervals for accuracy.
Outlines essential visual inspections of plugs, cables, and appliances before conducting any tests.
Explains how to identify Class I and Class II appliances and cables, including symbols.
Provides guidance on identifying the Class II symbol and what to do if it's not found.
Details the mandatory pre-use functional check of the tester before connecting appliances.
Step-by-step guide on connecting appliances and performing tests, noting pass criteria.
Demonstrates testing a Class I PC, requiring all LEDs to be green for a pass.
Shows testing a Class I water urn, confirming green LEDs for a pass.
Illustrates testing a Class I extension lead using an earth adapter.
Demonstrates testing a Class II drill, checking Insulation and Class II LEDs are green.
Covers testing laptop supplies, IEC cables, and special appliances with inaccessible metalwork.
Details the resistance ranges for Class I and Class II appliance tests, including pass/fail conditions.
Specifies test current limits for line, neutral, and earth tests, and output voltage.
Lists the physical dimensions, weight, and operating/storage temperature ranges of the tester.
Outlines the product warranty period, conditions, exclusions, and purchaser liability.
General| Model | miniPAT |
|---|---|
| Weight | 1.5 kg |
| Display | LCD |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Dimensions | 200 mm x 100 mm x 50 mm |
| Test Types | Leakage Current, Earth Bond, Insulation Resistance |
| Measurement Range | As per test type |
| Resolution | 0.01 Ω (Earth Bond), 0.01 MΩ (Insulation Resistance), 0.01 mA (Leakage Current) |
| Earth Bond | 0.01Ω to 2Ω |
To Next Page