Need help?Do you have a question about the Tesup ATLAS X and is the answer not in the manual?
General| Brand | Tesup |
|---|---|
| Model | ATLAS X |
| Category | Wind Turbines |
| Language | English |
Provides essential guidelines for safe and efficient installation and operation of the wind turbine.
Details the necessary conditions for correct erection, personnel competence, and system maintenance.
Explains the meaning of various symbols (Important, Danger, Warning, Caution) found throughout the manual.
Refers to the manufacturer's "General Terms of Sale and Delivery" for warranty information.
Instructs users on how to report accidents, safety hazards, or translation errors.
Defines the wind turbine's use as a small wind turbine system (SWTS) compliant with EN 61400-2.
Lists actions considered misuse, including unauthorized modifications and use of non-original parts.
Identifies key system parts: ATLAS X turbine, Charge Controller, Battery, and Inverter.
Details and illustrates the individual parts of the wind turbine with a comprehensive part list.
Specifies generator and rotor blade technical data, including power, voltage, and physical measurements.
Graphical representation of electrical power output versus wind speed at different system voltages.
Illustrates the overall physical layout and dimensions of the wind turbine system.
Describes the intelligent TESUP Charge Controller's features, efficiency, and protection functions.
Visual guide showing connections between turbine, controller, batteries, and grid systems.
Specifies optimal ambient temperatures for storage and operation, and wind class limits.
Prohibits user modifications and use of non-original parts to maintain conformity and warranty.
States that any residual risks are detailed in relevant sections of the manual.
Defines authorized personnel and their necessary qualifications for system operations.
Lists vital safety measures including proper torque, grounding, installation codes, and wire sizing.
Notes the turbine ships disassembled and refers to contract documentation for supply scope.
Outlines requirements for footprint, clearances, and general installation conditions at the use location.
Advises on wind classes, footprint, and clearances, emphasizing obstacle-free locations.
Provides specific dimensions for turbine base mounting and recommends M10 bolts or anchor fasteners.
Instructions for carefully opening packages and verifying the completeness of the shipment.
Step-by-step guide for assembling the turbine body, shaft, flanges, and wings.
Details 3-phase AC connections to the controller and output connections to batteries or grid.
Steps for safely powering on the wind turbine system after disengaging the emergency stop.
Procedure to safely restart the system once the cause of an emergency has been resolved.
Instructions for immediate shutdown via brake activation and turbine short-circuiting.
Procedure for temporary system shutdown, suitable for stormy weather conditions.
Steps for a long-term shutdown, involving brake engagement and turbine short-circuiting.
Critical safety measures to prevent injury during maintenance and ensure system security.
Outlines recommended daily and periodic inspection tasks for turbine components.
Recommends applying wax to the turbine and blades for weather protection and efficiency.
Procedures for safely dismantling the wind turbine, including electrical and mechanical steps.
Guidance on responsible disposal of electrical and mechanical components per local regulations.
A comprehensive list of all tables and figures within the manual, with corresponding page numbers.
To Next Page
