Tesup ATLAS X - Operating the System; System Startup Procedure; Restart After Emergency

24
8. REGULAR OPERATION
ATLAS X (MADE IN EUROPE)
8.1 SWITCHING ON THE WIND TURBINE SYSTEM
• Unlock the emergency stop button or release the brake button on the TESUP
charge controller.
• The brake is released.
• The fast-blinking red LED on the TESUP charge controller goes out.
• The wind turbine system supplies power.
NOTE: For Information on operating the charge controller, refer to
the separate instructions.
8.2 RESTART AFTER EMERGENCY
• Make sure the risk has been removed.
• Switch on the wind turbine system (section 8.1).