16
6.1 MODIFICATIONS BY THE USER
6. SAFETY INFORMATION
ATLAS X (MADE IN EUROPE)
• The wind turbine system is in conformity with the European Machinery
Directive 2006/42/EC provided only original ATLAS X components are used
and subject to proper erection. The use of components from other manufac-
turers as well as modifications or changes to the wind turbine system by the
user are prohibited and could render the declaration of conformity invalid!
6.2 RESIDUAL RISKS
• Any residual risks which arise because of operation or maintenance are de-
scribed in the relevant sections of these instructions.
6.3 PERSONNEL REQUIREMENTS
• All work on the wind turbine system must be carried out by authorized per-
sons! Such persons must be familiar with the safety devices and regulations
prior to carrying out the work.
• Authorized persons are defined as follows:
Operating mode Necessary qualifications
Erection Suitably trained persons
Normal operation Trained personnel
Cleaning Trained personnel
Maintenance Suitably trained persons
Repair Manufacturer
PERSONNEL REQUIREMENT TABLE
To Next Page
Loading...
