13
5.1 TECHNICAL DETAILS
5. CONTROLLER
• The Wind Turbine Charge Controller from TESUP is an intelligent controller
which controls the wind turbine. It safely and efficiently charges and control
your battery with the wind generator combination.
• With its discreet appearance and simple operation with integrated protec-
tion functions, this device has high efficiency and no-load losses. The ver-
sion of the controller will significantly increase the life and sustainability of
all the component of the system.
• The special features and product information are listed below:
• Use of solid-state components.
• Manual brake function.
• Increasing the life of the controller. Microprocessor controlled charge
with integrated voltage and current limiting.
• Dump-load is included. Modern Load dissipation system in three steps
to avoid immediate blockage of turbine.
• Resistors might be used for heating.
ATLAS X (MADE IN EUROPE)
To Next Page
Loading...
