Tetra LightWave Timer - Disposal and Specifications; Proper Disposal Methods

12 LightWaveTimer
UK
Malfunction Cause Solution
LED light too dark or
flickers.
Brightness is set too
low.
Increase the brightness.
Eect is currently
enabled.
Once the eect has fin-
ished, the brightness will
be automatically reset.
Incompatible power
supply in use.
Use the original power
supply.
Eects do not start or
at wrong time.
Current time is not set
correctly.
Set the current time
correctly.
Start time of the eect is
not set correctly.
Set the required start
time.
Disable eect. Enable eect.
LightWave Timer dis-
plays the wrong time.
Power supply has been
interrupted.
Set the current time
correctly.
DISPOSAL
The LightWave Timer contains electronic components and cannot be dis-
posed of with standard household waste.
• Dispose of the device using the return system for your area so that the raw
materials can be recycled.
• Cut o all cables prior to disposal to prevent the device from being used.