Connecting the Headphones
Connect the head-
phones and the head-
phone jack of your audio
system using one of the
enclosed cables.
Both cables are fur-
nished with 3.5mm jack
plugs. A 6.3mm adapter
is also enclosed. This enables the con-
nection to all conventional headphone
jacks.
Handling
When putting on the headphones, en-
sure that the ear-pieces marked with L
and R are located on your left and right
ear respectively.
Adjust the headband length to your
head size.
Instruction No. 92966 GB 20151020
Cleaning
Clean the ear cushions and the head-
band with a soft dry cloth. Do not in any
case use aggressive cleaning agents as
they may damage the sensitive surface.
Technical Data
Driver unit: Ø 50 mm
Max Input Power: 1000 mW
Impedance: 32 Ω ±15 %
Sensitivity: 98 dB +/- 3 dB at 1 kHz
Freq. response: 10-22000 Hz
Weight: 310 g
For questions, suggestions or criticism please contact our customer service department:
Lautsprecher Teufel GmbH
BIKINI Berlin
Budapester Str. 44
10787 Berlin (Germany)
Phone 00800 - 200 300 40
(toll-free)
Fax: +49 (0)30 - 300 930 930
www.teufelaudio.com
No liability is accepted for the accuracy of
this information. Technical changes, typo-
graphical errors and other errors reserved.
To Previous Page
Loading...
